AMD P2 Face Mask:

1. Ensure your hands are clean before handling the face mask.
2. Take care not to touch the inside layer of the respirator that will be in contact with the nose and mouth when unpacking and while donning.
3. Check for defects in the face respirator such as tears or broken loops.
4. Position the label side of the respirator outward and orient the respirator so that the foam nose bridge strip is at the top.
5. Unfold the respirator while holding onto the edges (again being careful not to touch the area that will be in contact with the nose and mouth). Position the unfolded respirator over the nose and mouth and place one ear loop over each ear.
6. Mould the nose bridge wire to the bridge of the nose and while pinching the nose bridge in place stretch the bottom of the respirator over the chin. 
7. Press along the edges of the respirator to maximise the seal.

ViroCLEAR Hand Sanitiser Spray:

1. Apply a small amount of hand sanitiser to the palm of your hand.
2. Rub your hands together, ensuring you cover all surfaces of your hands and fingers.
3. Continue rubbing until the sanitiser has completely evaporated, typically for about 20-30 seconds.
4. Use hand sanitiser whenever soap and water are not readily available, especially before and after touching surfaces or coming into contact with others.

ViroCLEAR Disinfectant Room Fogger

1. Ensure the room to be treated is well-ventilated and that any occupants or pets are outside the room.
2. Shake the ViroCLEAR room fogger canister well for 30 seconds before use.
3. Place the room disinfectant spray in the centre of the room, ensuring all windows and doors are closed, and turn air-conditioning on to full (where applicable).
4. Press and lock down the nozzle to release the fogging mist.
5. Leave the room immediately and close the door.
6. Allow the fogging mist to disperse and settle for about 10 minutes.
7. Let the room settle for 30 minutes after sanitising. Do NOT wipe down surfaces after sanitation.

ViroCLEAR Surface Disinfectant:

1. Before using the surface disinfectant, ensure the surface is free of any visible dirt or debris. Clean the surface with a suitable cleaning agent if necessary.
2. Spray the ViroCLEAR surface disinfectant directly onto the surface to be disinfected. Ensure the surface is thoroughly wetted with the disinfectant.
3. Wipe the surface with a clean cloth or paper towel.
4. Dispose of any used cleaning materials properly.

AMD P2 Masks

• Brand: AMD
• Number per box: 50
• Packaging: Bulk case
• Filter Included: Yes
• Face seal/Nose foam: Nose foam
• Fluid Resistant (ASTM F1862): No
• Flame Resistance (ASTM D2859-96): No
• Flammability Rating: Class 1
• Product Colour: White
• Product Type: Dust and other Particles
• Respirator Style: Flat Fold
• Size: Standard
• Australia and New Zealand Compliance Standards: P2
• Standards/Approvals: AS/NZS 1716:2012

ViroCLEAR Hand Sanitiser Spray

Product size: 50ml

ViroCLEAR Disinfectant Room Fogger

Product size: 105g

ViroCLEAR Hospital Grade Surface Disinfectant

Product size: 500 mL

ViroCLEAR contains 0.12% w/w benzalkonium chloride. When using ViroCLEAR always read the label and carefully follow directions for use.

AMD P2 Mask

Click here for Certifications and Reports for the face masks.

ViroCLEAR Hand Sanitiser

Safety Data Sheet: Click here

ViroCLEAR Disinfectant Room Fogger

Safety Data Sheet: Click here

ViroCLEAR Hospital Grade Surface Disinfectant

Safety Data Sheet: Click here

ARTG: Click here